Transit in flexible configuration for multiple cables and pipes entering via foundations.
The Roxtec R UG™ is a transit for multiple cables and pipes entering via foundations. The seal allows for a mix of small and large cables and pipes in the same opening and works as a long-lasting barrier against flooding, gas, humidity and rodents. The transit withstands extreme cable bending and can be installed into sleeves, conduits and core drilled holes also in wet conditions and environments with running water.
- Rodent resistant
- Area efficient
- Quick and easy to install
- Easy to maintain and inspect
Download
Product characteristics
-
Watertight
-
Gas-tight
-
IP/UL NEMA
Download
Ratings & certificates
Certificates are continuously added, renewed and replaced, please visit regularly to ensure compliance.
Specification texts
- Small front and back fittings to allow for full insertion into aperture
- Openable for use around existing cables and pipes
- IP 68 tested and certified for constant water pressure to 0.5bar and catastrophic pressure to 1bar
- Can be installed in running water conditions
- Roxylon™ EPDM rubber is halogen free and fulfils RoHS and REACH directives. Shown not to contain any conflict minerals
- Fittings manufactured from non-magnetic acid proof stainless steel. Minimum clearance of 3mm between rubber and metal fittings to prevent direct contact between the cable and any metal components
- Fasteners should be made out of non-magnetic acid proof stainless steel (minimum class A4-70)
- Gas tight to 0.3bar
- Prevents ingress from water, gas, dust and vermin
- Cable retention with a pull force in the range of 2700-3300N and a weight load of up to 275-336kg
- Module depth: 60mm
- Available in kits to seal cables and pipes with overall diameter between 4 and 52mm in 1mm increments. Larger diameters up to 96mm also possible in other configurations
- Rubber depth minimum 60mm
Installation
Read more about the Roxtec sealing system and learn how to perform a correct transit installation on our installation pages.
Structure of installation
-
Concrete
Mounting type
-
Existing sleeve
-
Existing hole
Installation instructions
Technical drawings
.jpg?width=2000&height=2000&rmode=min&hmac=69eded853229cbe7fdf57ee7891b7aeef892f6152241e7481ddcea39dd22ffa3)
Seals for your industry
Explore the multitude of applications where you can benefit from our solutions.
Sealing component data
Here you find technical information about each specific part of our system.
Round frames/seals
Sealing components
Pre-configured transit kits
R 150/6 UG
- Capacity (quantity x size) 5x (10.0-23.5) 1x (24.0-52.0)
- Weight (kg) 2.59
- Art. No 120859
R 150/9 UG
- Capacity (quantity x size) 9x (10.0-23.5)
- Weight (kg) 2.65
- Art. No 117821
R 200/15 UG
- Capacity (quantity x size) 7x (9.5-31.0) 8x (4.0-13.0)
- Weight (kg) 4.47
- Art. No 117855
R 200/4 UG
- Capacity (quantity x size) 4x (24.0-52.0)
- Weight (kg) 4.5
- Art. No 117822
R 200/7 UG
- Capacity (quantity x size) 3x (24.0-52.0) 4x (10.0-23.5)
- Weight (kg) 4.5
- Art. No 117854