Use the print button on the page for an optimized print layout.
Transit for cables entering via foundations.
The Roxtec H3+1 UG™ seal is ideal for power cables in trefoil formation entering via foundations together with a grounding cable. It works as a long-lasting barrier against flooding, gas, humidity and rodents. It is a four-part seal that is easy to install also in wet conditions and in environments with running water. The transit withstands extreme cable bending and has a +3mm tolerance towards the aperture as well as an indicator showing when a compressed seal is achieved. The seal can be installed into knock-out sleeves, conduits and core drilled holes.
- Rodent resistant
- Quick and easy to install
- Provides excellent cable retention
Download
Product characteristics
-
Watertight
-
Gas-tight
-
IP/UL NEMA
Download
Ratings & certificates
Certificates are continuously added, renewed and replaced, please visit regularly to ensure compliance.
Specification texts
- IP 68 tested and certified for constant water pressure to 0.5bar and catastrophic pressure to 1bar
- Can be installed in running water conditions
- Roxylon™ EPDM rubber is halogen free and fulfils RoHS and REACH directives. Shown not to contain any conflict minerals
- Fittings manufactured from non-magnetic acid proof stainless steel. Minimum clearance of 3mm between rubber and metal fittings to prevent direct contact between the cable and any metal components
- Fasteners should be made out of non-magnetic acid proof stainless steel (minimum class A4-70)
- Fully split design for easy installation
- Installation compression indicator window
- Gas tight to 0.3bar
- Prevents ingress from water, gas, dust and vermin
- Cable retention with a pull force in the range of 2200-3300N and a weight load of up to 336kg, depending on size
- Rubber depth minimum 60mm
Installation
Read more about the Roxtec sealing system and learn how to perform a correct transit installation on our installation pages.
Structure of installation
-
Concrete
Mounting type
-
Existing sleeve
-
Existing hole
Installation instructions
Technical drawings
Seals for your industry
Explore the multitude of applications where you can benefit from our solutions.
Sealing component data
Here you find technical information about each specific part of our system.
Round frames/seals
Sealing components
Pre-configured transit kits
H3+1 150 UG
- Capacity (quantity x size) 4x (10.0-53.0)
- External dimensions ØxD (mm) 150 x 85
- Weight (kg) 2.57
- Art. No 192261
H3+1 153 (6") UG
- Capacity (quantity x size) 4x (10.0-53.0)
- External dimensions ØxD (mm) 152.5 x 86
- Weight (kg) 2.63
- Art. No 224524
H3+1 200 UG
- Capacity (quantity x size) 4x (10.0-68.0)
- External dimensions ØxD (mm) 200 x 95
- Weight (kg) 4.25
- Art. No 192082
H3+1 201 (8") UG
- Capacity (quantity x size) 4x (10.0-68.0)
- External dimensions ØxD (mm) 201 x 94
- Weight (kg) 4.68
- Art. No 224542