Penetration seal for plastic pipes for basic protection against fire, gas and water.
The Roxtec Sleev-it™ Waterproof penetration seal is a light-weight solution. Its stainless steel casing contains intumescent material to block the penetration in case of fire and its rubber grommet is engineered for a range of pipe sizes. It is installed from one side and is available for both steel and aluminum structures.
- Fire rated
- Watertight
- Light-weight
- Area efficient
- Quick and easy to install
Ratings & certificates
Certificates are continuously added, renewed and replaced, please visit regularly to ensure compliance.
Installation
Structure of installation
-
Metal
Mounting type
-
Welded
Installation instructions
Information drawings
Information drawings
Sealing component data
Here you find technical information about each specific part of our system.
Round frames/seals
Pre-configured transit kits
Aluminum
Primed mild steel
| Product | Configuration | External dimension Ø (mm) | Aperture dimension Ø (mm) | Weight (kg) | Art. No | |
|---|---|---|---|---|---|---|
| SLEEV-IT WT MAR16M ALU | 75 | 47 - 53 | 0.15 | 151259 | ||
| SLEEV-IT WT MAR20M ALU | 80 | 53 - 59 | 0.18 | 151260 | ||
| SLEEV-IT WT MAR25M ALU | 85 | 59 - 65 | 0.2 | 151261 | ||
| SLEEV-IT WT MAR32M ALU | 95 | 66 - 72 | 0.3 | 151262 | ||
| SLEEV-IT WT MAR40M ALU | 100 | 73 - 79 | 0.3 | 151263 | ||
| SLEEV-IT WT MAR50M ALU | 110 | 83 - 89 | 0.3 | 151265 | ||
| SLEEV-IT WT MAR50M ALU (1.5") | 110 | 81 - 87 | 0.3 | 151264 | ||
| SLEEV-IT WT MAR60M ALU (2") | 125 | 97 - 103 | 0.4 | 151266 | ||
| SLEEV-IT WT MAR63M ALU | 125 | 100 - 106 | 0.4 | 151267 | ||
| SLEEV-IT WT MAR75M ALU | 145 | 117 - 123 | 0.5 | 151268 | ||
| SLEEV-IT WT MAR90M ALU | 160 | 132 - 138 | 0.7 | 151270 | ||
| SLEEV-IT WT MAR90M ALU (3") | 160 | 131 - 137 | 0.7 | 151269 | ||
| SLEEV-IT WT MAR110M ALU | 185 | 157 - 163 | 0.8 | 151271 | ||
| SLEEV-IT WT MAR115M ALU (4") | 190 | 163 - 169 | 0.9 | 151272 | ||
| SLEEV-IT WT MAR125M ALU | 200 | 172 - 178 | 1 | 151273 | ||
| SLEEV-IT WT MAR140M ALU | 220 | 192 - 198 | 1.1 | 151274 | ||
| SLEEV-IT WT MAR160M ALU | 240 | 212 - 218 | 1.1 | 151275 | ||
| SLEEV-IT WT MAR169M ALU (6") | 250 | 221 - 227 | 1.4 | 151276 | ||
| SLEEV-IT WT MAR200M ALU | 290 | 262 - 268 | 1.8 | 151277 |
| Product | Configuration | External dimension Ø (mm) | Aperture dimension Ø (mm) | Weight (kg) | Art. No | |
|---|---|---|---|---|---|---|
| SLEEV-IT WT-MAR16M | 73 | 36 - 46 | 0.25 | 106315 | ||
| SLEEV-IT WT-MAR20M | 78 | 44 - 54 | 0.32 | 106316 | ||
| SLEEV-IT WT-MAR25M | 84 | 46 - 56 | 0.34 | 106319 | ||
| SLEEV-IT WT-MAR32M | 91 | 53 - 63 | 0.37 | 106322 | ||
| SLEEV-IT WT-MAR40M | 102 | 64 - 74 | 0.41 | 106325 | ||
| SLEEV-IT WT-MAR50M | 112 | 74 - 84 | 0.47 | 106328 | ||
| SLEEV-IT WT-MAR50M (1.5") | 112 | 74 - 84 | 0.48 | 106359 | ||
| SLEEV-IT WT-MAR60M (2") | 121 | 85 - 95 | 0.5 | 106362 | ||
| SLEEV-IT WT-MAR63M | 121 | 88 - 98 | 0.5 | 106331 | ||
| SLEEV-IT WT-MAR75M | 142 | 107 - 117 | 0.7 | 106334 | ||
| SLEEV-IT WT-MAR90M | 165 | 127 - 137 | 1 | 106337 | ||
| SLEEV-IT WT-MAR90M (3") | 164 | 129 - 139 | 1 | 106365 | ||
| SLEEV-IT WT-MAR110M | 183 | 148 - 158 | 1.2 | 106341 | ||
| SLEEV-IT WT-MAR115M (4") | 186 | 147 - 157 | 1.2 | 106371 | ||
| SLEEV-IT WT-MAR125M | 202 | 167 - 177 | 1.4 | 106344 | ||
| SLEEV-IT WT-MAR140M | 224 | 175 - 185 | 1.6 | 106347 | ||
| SLEEV-IT WT-MAR160M | 243 | 210 - 220 | 1.8 | 106350 | ||
| SLEEV-IT WT-MAR169M (6") | 255 | 220 - 230 | 2 | 106373 | ||
| SLEEV-IT WT-MAR200M | 311 | 245 - 255 | 3 | 106353 | ||
| SLEEV-IT WT-MAR225M | 335 | 285 - 295 | 3.7 | 106356 |