Solutions | Roxtec d.o.o. Hrvatska

Za optimizirani izgled ispisa upotrijebite gumb za ispis na stranici.

Transit for cables entering via foundations.

The Roxtec H3+1 UG™ seal is ideal for power cables in trefoil formation entering via foundations together with a grounding cable. It works as a long-lasting barrier against flooding, gas, humidity and rodents. It is a four-part seal that is easy to install also in wet conditions and in environments with running water. The transit withstands extreme cable bending and has a +3mm tolerance towards the aperture as well as an indicator showing when a compressed seal is achieved. The seal can be installed into knock-out sleeves, conduits and core drilled holes.

Rodent resistant
Quick and easy to install
Provides excellent cable retention

Preuzimanje

Tehničke specifikacije (metrički)

Karakteristike proizvoda

Watertight
Gas-tight
IP/UL NEMA

Preuzimanje

Tehničke specifikacije (metrički)

Indeks stranice

Klase i certifikati Tekstovi specifikacija Montaža Brtve za vašu industriju Podaci o komponenti za brtvljenje Unaprijed konfigurirani kompleti za prolaze

Klase i certifikati

Certifikati se kontinuirano dodaju, obnavljaju i ažuriraju. Redovito posjećujte našu web-stranicu s certifikatima kako bi bili sigurni da imate važeću dokumentaciju.

Požar

Nije dostupno

Nepropusnost

Plin: 0.3 bar (constant)
Voda: 0.5 bar (constant)
IP 68

Tekstovi specifikacija

Ispiši

Roxtec H3+1 UG™ seal for cables or pipes in trefoil formation...

Roxtec H3+1 UG™ seal for cables or pipes in trefoil formation plus a grounding cable. Manufactured from Roxylon™ UG EPDM rubber with Multidiameter™, the Roxtec solution for sealing around cables and pipes with removable layers in 1 mm increments.

IP 68 tested and certified for constant water pressure to 0.5bar and catastrophic pressure to 1bar
Can be installed in running water conditions
Roxylon™ EPDM rubber is halogen free and fulfils RoHS and REACH directives. Shown not to contain any conflict minerals
Fittings manufactured from non-magnetic acid proof stainless steel. Minimum clearance of 3mm between rubber and metal fittings to prevent direct contact between the cable and any metal components
Fasteners should be made out of non-magnetic acid proof stainless steel (minimum class A4-70)
Fully split design for easy installation
Installation compression indicator window
Gas tight to 0.3bar
Prevents ingress from water, gas, dust and vermin
Cable retention with a pull force in the range of 2200-3300N and a weight load of up to 336kg, depending on size
Rubber depth minimum 60mm