Round seal for single cables and pipes entering via foundations.
The Roxtec RS UG™ is a two-part seal for installation around single cables or pipes entering via foundations. It works as a long-lasting barrier against flooding, gas, humidity and rodents. The transit can be installed also in wet conditions and environments with running water. It withstands extreme cable bending and has a +5mm tolerance towards the aperture as well as an indicator showing when a compressed seal is achieved. The seal can be installed into sleeves, conduits and core drilled holes.
- Rodent resistant
- Quick and easy to install
- Easy to maintain and inspect
Specification texts
- Small front and back fittings to allow for full insertion into aperture
- IP 68 tested and certified for constant water pressure to 0.5bar and catastrophic pressure to 1bar
- Can be installed in running water conditions
- Roxylon™ EPDM rubber is halogen free and fulfils RoHS and REACH directives. Shown not to contain any conflict minerals
- Fittings manufactured from non-magnetic acid proof stainless steel. Minimum clearance of 3mm between rubber and metal fittings to prevent direct contact between the cable and any metal components
- Fasteners should be made out of non-magnetic acid proof stainless steel (minimum class A4-70)
- Fully split design for easy installation
- Installation compression indicator window
- Gas tight to 0.3bar
- Prevents ingress from water, gas, dust and vermin
- Cable retention with a pull force in the range of 1700-15000N and a weight load of up to 1529kg, depending on size
- Rubber depth minimum 60mm
Seals for your industry
Explore the multitude of applications where you can benefit from our solutions.